A 6 deg draft angle is incorporated into the primary design to allow for easier stacking and transport. To achieve this geometry, an extra chamfer step is required on parts B and C to ensure seams are perpendicular for gluing. If you do not require stackability, an alternate set of plans is provided with zero draft angle. The inside width of the zero draft box is 650 mm, equal to the widest part of the original box.
This project is Not-for-profit & Non-Commercial, and is freely licensed under the Creative Commons Attribution-NonCommercial 4.0 International License.
Download
Notice and Agreement
This website and all information on it (collectively the “Information”) is provided by its providers (each, some, and all of them being referred to as the “Authors”) as a public service at a time of world-wide emergency resulting from the spread of the novel Coronavirus that causes the disease referred to as Covid-19. The Information is provided without warranty of any kind, either express or implied, as to any matter including, but not limited to, warranty of fitness for particular purpose, merchantability, exclusivity, accuracy, integration or results obtained or obtainable from use including but not limited to any use of any device or property made or created by, through or with application of any of the Information (“Device”). Nor shall the Authors be liable to any viewer or user of this website or to anyone who obtains or receives the Information by any means (“User”) for indirect, special or consequential damages including but not limited to loss of profits or inability to use, use properly or use without errors any of the Information or any Device. The Authors make no warranties of any kind with respect to freedom from patent, trademark, or copyright infringement, informational content, accuracy, integration or theft of trade secrets and do not assume any liability for any infringement of any patent, trademark or copyright arising from the use of the Information or any Device. Each User by making any use whatsoever of the Information agrees with the Authors that such User: (a) attorns to the exclusive jurisdiction of the courts of British Columbia, Canada, with respect to all matters related to the Information and the Authors; (b) agrees with the Authors that the laws of British Columbia and of Canada in force therein without regard to their conflict of laws provisions that might determine their laws to be applicable shall govern any and all matters that might arise between the User and the Authors relating to the Information and any Device; (c) agrees that the User shall not transmit any of the Information to anyone (a “Third Party”) without including prominently displayed therewith this NOTICE AND AGREEMENT; and (d) agrees that the User shall not make any warranty, express or implied, on behalf of the Authors to anyone concerning the application of, accuracy of, or the results to be obtained with the Information or any Device or with respect to any other matter. The Authors specifically note that unless otherwise expressly indicated in the Information no governmental authority of any kind has made any determination with respect to the Information or any Device.